OPTIMAX2

OPTIMUS S.A. is the leading Spanish company in the design, manufacture and distribution of public address (PA), voice alarm (VA) and intercom equipment.

PLATFORM

logoOPTIMAX

As a specialist in public address and voice alarm systems, OPTIMUS has a service oriented to provide specific and customized solutions.

The OPTIMAX2 platform uses its own hardware and software, as well as some standard elements of the COMPACT system (among others, cards, microphone desks and power units).

Its flexibility, scalability and integration capacity allows the adaptation or creation of new hardware and / or the development of customized software.

hardware software block diagram integration & customization works

OPTIMUS provide a wide range of IP sound products that are mainly designed to comply with the Railway's industry requirement as well as customized products (hardware & software) to achieve specific demands and integrations with other services.

In the Optimax2 platform we have implemented all the experience achieved in the most restrictive MRT/LRT and Railways installations done in the last 30 years.

Using Optimax2 platform we can project a completely new PA solution and/or convert a legacy existing system into a new IP based technology system.

As specialist in Public Address & Voice Alarm Systems, OPTIMUS aim is to provide a service with specific and tailor-made solutions.

Optimax2 System is suitable for both centralized or distributed systems, scalable and modular, for infrastructures of any type and size, linked through the corporate data network.

Its flexibility, scalability and integration capability allows it to adapt or create new hardware and/or develop customized software to meets the needs of the installation.

Pre-recorded and live alarm announcements,
Music broadcasting

Speaker zones management
Microphone desks connected by bus or through the corporate data network

Reception of 4 simultaneous digital audio channels through IP connection
Call Point Software, for live or pre-recorded announcements, alarm notification ...

Contacts for emergency functions, message activation, zone control ...
Audio outputs with individual volume control

Supervision of the critical path: lines of speakers, amplifiers, cards, power, contacts, pre-recorded messages ...

Integration through PC (XML) and direct integration (JSON, SNMP, API / DLL)
Reception and transmission of control data via IP connection

SIP protocol compatible
Systems can be linked through a corporate network and accessible from IP points (microphones, SIP phones ...)

Double Ethernet connection (Layer 2 and 3) and double power input for installations with redundancy
Operating over the Internet through VPN

EXAMPLE: URBAN TRANSPORT

OPTIMAX2 UrbanTransport

HARDWARE

Digital audio matrix UMX-03

The audio matrix UMX-03 is the central unit of the OPTIMAX2 system, with redundant connection to IP, reception and emission of 4 simultaneous IP audio channels and internal bus of 16 audio channels,
As a link to the fire alarm system, it has 3 supervised input contacts, as well as 3 outputs (voltage free contacts) and 1 safety fault relay output.
The matrix already incorporates the supervision of lines and power stages of the UMX-2SA cards with two audio outputs, to be installed in their slots (10 in each matrix, main or secondary).
The 32 GB of memory allows to store the messages of warnings, evacuation and alarm in MP3, WAV or Ogg-Vorbis format.
The matrix is prepared to host a handheld microphone for emergency announcements (Firemen's Microphone) and other optional modules.
In addition to the audio inputs to connect into the cards inserted in the slots, it has a USB input on the front to connect a musical source.
The CAN bus allows the connection of external equipment, such as the secondary units of the audio matrix itself, microphonic desks for zone control or noise sensors.
The matrix can receive VoIP calls (SIP protocol) with zone selection via DTMF.

IP interface in/out IF-822ETH / IF-804ETH

Interface to connect power units at any point of the network.
It allows the connection of any type of analog power amplifiers for public address.
It converts the existing public address system into an IP system.
It receives messages from the IP microphone desks and the general SIP telephones of a COMPACT system, as well as the general music channels.
Front USB input for music.
16 GB to store audio messages.
IF-822ETH - 2 audio IN + 2 audio OUT | IF-804ETH - 4 audio OUT

IP interface in/out/power IF-8P4ETH

4 simultaneous IP audio channels
It can accommodate up to 4 amplifiers (one for backup if necessary) of high efficiency (> 90%) of 120, 150, 250, 300 and 460 W
Equipment supervision, speaker lines included
Speaker lines A / B for each amplifier
Analog audio inputs (interface with existing systems)
Expansion units if more amplifiers are needed
Interface with the fire alarm system (FAS)
16 GB to store audio messages
SIP phone calls reception
Hot swapping